This presentation aims to introduce the structure of ESA kit and demonstrate how to physically install it.
Compatible with Cubby V2 computing sled, this kit makes it easy to transform an 19 inch EIA rack to an OCP rack. We take 8OU 19' standard ESA Kit as an example.
This presentation is going to present the structure of the ESA Kit and steps to assemble the kit and server.
Here is the list of everything you will need to build a fully functional Rapid Space rack. In the description, you will find the reference of our provider when it exists.
The ESA kit provides a solution so that an OCP V.2 sled can be installed into the a EIA 19” legacy rack. It is adjustable and able to support the depth rail mounting flanges for EIA rack from 24” to 30”. With an ESA kit, you can have EIA standard IT equipment and OCP in the same rack.
Components of ESA are categorized as rail kits, bus bar kits and shelf as shown in the image.
Any EIA Rack can host an ESA kit, as long as the length, height and depth of the cabinet support the adjustable range of ESA Kit.
Use the four bars inside the cabinet to fix the rail kits, one rail kit on the left side, and the other rail kit on the right side.
Please be aware that the length of the rail kit is adjustable, you need to remove the screw before adjusting the length of the rail kit, in order to fit it in the cabinet.
WARNING: the left and right rail kits are different, make sure to look at the "R" and "L" letter on the rail kit.
Adjustable part on the rail kit.
Now assemble the bus bar with screws as showing in the photo.
Fix the assembled Bus bar in the back of the cabinet, fixing with the two rail kits on each side.
Image on the left side: This is the power supply shelf.
Image on the right side: This black plastic covers a metal fixture where you need to attach a pair of junctions (red and black). In order to take off this black plastic, you should first remove those 5 screws from the top to both sides.
After you remove the black cover, you will see these two metal mounting parts. There is a plus sign "(+)" and a minus sign "(-)" on each side. For the next step, the red junction should be fixed on the (+) side and the black one should be fixed on the (-) side. The vertical sides (with screw holes) should be in parallel as the picture shows.
Image on the left side: Once the position of jonctions are well set, screwing them tightly to the bus bar. Please note that before fixing this part, you need to remove a screw first from the bus bar.
Image on the right side: Once jonctions in the back are fixed, You can place nuts (for fixing the front side of the power supply shelf) on the 5th hole counting from the bottom, one nut on the left bar and one nut on the right bar (facing towards the front of the rack/cabinet).
This is how the power supply shelf looks like after installation.
Image on the left side: the power supply unit.
Image on the right side: insert the power supply unit into power supply shelf.
Video showing how to insert and lock the power supply unit.
This is a picture of the shelf you received in the components, you shall receive four of them for one standard 19 inch rack.
Insert the shelf into the rack.
The OCP server is received as the photo presented, you need to put CPU, hard drive, SSD card, etc and then push this server into the shelf.